Users Manual
11
Hardware Connections & Indicators
Ethernet Connection
RJ45 female: Yellow LED flashes when the connector is
active, glows steadily when data is streaming. Green LEDs
glow when connected but inactive, turn Orange to indicate a
faulty connection.
Clip LED
Flashes red when the Analog Input preamplifier is
being overdriven
AES LED
Illuminates when the AES
input is selected
+10dB Boost LED
Illuminates when the +10dB Boost is enabled
Signal LED
Flickers when an audio signal of at least -30 dBu is
present at the primary analog audio input.
Aux
Setup DIP
Switches
and Legend
Analog Inputs 2 and 1
Phoenix 6-pin connector
AES/EBU Input
Reset Button
When pressed
and held for
three seconds,
the loudspeaker
will restart and
be returned to
factory default
settings. This will
not delete saved
User Presets.
Preset
Readout
Preset
Readout
Power
LED
Power
LED
Fault LED
Lights to indicate a fault condition in
the amplifier or power supply.
See Fault LED on page 14 for details
Fault LED
Lights to indicate a fault condition in
the amplifier or power supply.
See Fault LED on page 14 for details
90/260 V AC
IEC Power
Connector
MASTER
MODULE
AUX
MODULE
Fault Relay
Pins NC, W and NO
See Fault Relay on page 14 for details
