Renkforce 1423362, Operating Instructions Manual

Page: 51 / 116

51
i) Weather forecast
• The projection radio alarm clock contains a pressure-sensitive sensor for the weath-
er forecast of the next 12 to 24 hours.
• The symbols of the weather forecast are assigned as follows:
Display Description
Sunny
Slightly overcast
Overcast
Rain
The accuracy of a general pressure-based weather forecast is at 70% to 75%.
j) Switching the DCF-signal on and off
• To switch off the DCF signal (RCC), push the button “
RCC
” (
B14
) for approx. 8 seconds.
It is located at the rear of the radio projection alarm clock. Release the button when
the display shows “ OFF ”.
• To switch on the DCF signal (RCC), push the button “
RCC
” (
B14
) for approx. 8 seconds
again. Release the button when the display shows “ ON ”.
• If you push the button “
RCC
” (
B14
) only briefly, you will start DCF reception manually.