Example:
e) Click OK and then OK again. Whether or not this setting has taken effect depends on the version of Windows that you are running. On
earlier versions you will need to reboot the PC. To be absolutely sure, reboot your PC anyway.
Setting the IP address of the UCC2 or UCC2-2
The UCC2 or UCC2-2 is not intended to be used on a corporate network. It is extremely important that this setting of the IP address of the
UCC2 or UCC2‐2 is on a dedicated connection. It is also important that the connection is not “firewalled” at the PC end. You need
administrator rights in order to perform this operation.
When it is first installed the UCC2 or UCC2-2 does not have any IP address. Turn the UCC2 or UCC2-2 on and wait for it to boot up. It will
enter its IP configuration state, shown by the Error LED flashing rapidly. (Please be patient; this will take about 15 seconds.)
Now start the UCC IP configuration software on the PC.
a﴿ Start → UCC Software → IP Configurer
b) Click on the drop-down icon and select the IP address of the network adapter into which the UCC2 or UCC2-2 is plugged. (This should be
the one on which you set the IP address of in 'Setting the IP address of the PC'.)
UCC2 and UCC2-2 installation guide
www.renishaw.com
Issued 07 2021
36
