PICS connector
This socket is intended for use with any of the range of Renishaw touch-trigger probes, including the TP200. The connector is a 9-pin
miniature 'D' socket, pinout as follows:
Pin number
Function
Pin number
Function
1
PICS STOP
6
Reserved
2
PICS probe power off (PPOFF)
7
PICS probe damping (PDAMP)
3
0 V
8
PICS LED off (LEDOFF)
4
PICS LED anode
9
Probe common
5
Probe signal
Shell
Screen
Scanning probe connector
The plug on the cable from the analogue probe connects to the 15‐way high‐density ‘D' socket on the rear panel of the UCC2.
This socket is intended for use with the Renishaw TP2, TP6, TP20 and TP200 touch-trigger probes and the SP25 and SP600 series of analogue
scanning probes.
The pin-out of the socket is as follows:
Pin number
Function
Pin number
Function
1
+5 V supply
9
Not connected
2
Not connected
10
Overtravel
3
Probe common
11
A signal
4
B signal
12
0 V reference
5
C signal
13
Touch-trigger probe signal
6
+12 V supply
14
Fixed probe head LED cathode
7
-12 V supply
15
Fixed probe head LED anode
8
Probe identification
Shell
Screen
UCC2 and UCC2-2 installation guide
www.renishaw.com
Issued 07 2021
18
