FCC (USA only)
Information to the user (47CFR section
15.19)
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions:
1.
This device may not cause harmful
interference, and
2.
This device must accept any interference
received, including interference that may
cause undesired operation.
Information to user (47CFR section 15.21)
The user is cautioned that any changes or
modifications not expressly approved by
Renishaw plc or authorised representative
could void the user’s authority to operate the
equipment.
Information to the user (47CFR section
15.105)
This equipment has been tested and found
to comply with the limits of a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. The equipment generates, uses
and can radiate radio frequency energy and,
if not installed and used in accordance with
the SLM 250 manual, may cause harmful
interference to radio communications.
EC declaration of conformity
c
Renishaw plc declares that the Fanbeam 5
system and associated accessories comply with
the applicable standards and regulations.
Contact Renishaw plc or visit
www.renishaw.com/fanbeam
for the full EC
declaration of conformity.
WEEE
The use of this symbol on Renishaw products
and/or accompanying documentation indicates
that the product should not be mixed with
general household waste upon disposal. It is
the responsibility of the end user to dispose
of this product at a designated collection point
for waste electrical and electronic equipment
(WEEE) to enable reuse or recycling. Correct
disposal of this product will help to save valuable
resources and prevent potential negative effects
on the environment. For more information,
please contact your local waste disposal service
or Renishaw distributor.
Renishaw part no: H-9933-8501-01-A
Issued:
February 2015
EC declaration of conformity
Renishaw plc declares that the SLM 250
complies with the applicable standards and
regulations.
Renishaw plc hereby declares that the SLM 250
is in compliance with the essential requirements
and other relevant provisions of Directive
1999/5/EC.
Contact Renishaw plc or visit
www.renishaw.com for the full EC declaration of
conformity.
WEEE directive
The use of this symbol on Renishaw products
and/or accompanying documentation indicates
that the product should not be mixed with
general household waste upon disposal. It is
the responsibility of the end user to dispose
of this product at a designated collection point
for waste electrical and electronic equipment
(WEEE) to enable reuse or recycling. Correct
disposal of this product will help to save
valuable resources and prevent potential
negative effects on the environment. For more
information, please contact your local waste
disposal service or Renishaw distributor.
Summary of Contents for SLM 250
Page 49: ......