10-1
Command list
10
Command list
The list of commands in this section will assist in the development of customer software to control
the SLM 250.
A simple, ASCII character-based command/response structure is implemented over Ethernet using
UDP packets.
Commands are either a single command terminated with an ASCII line feed <lf> character (0x0A)
or a single command with associated data, which is again terminated with an ASCII line feed
character.
A UDP-enabled terminal program, such as the Hercules SETUP utility developed by the HW Group,
can be used to communicate directly with the SLM 250 to help software development.
Summary of Contents for SLM 250
Page 49: ......
