Warranty
Renishaw plc warrants its equipment provided
that it is operated exactly as defined in
associated Renishaw documentation.
Laser safety
DO NOT STARE DIRECTLY
INTO THE BEAM
In accordance with BS EN 60825-1: 2007 and
US standards 21CFR 1040.10 and 1040.11,
except for deviations pursuant to Laser Notice
no. 50, dated June 24, 2007, the SLM 250 is
classified as a Class 1 invisible laser product.
Safety eyewear is not required for the SLM 250.
Do not stare into the beam or shine it into
the eyes of others. It is safe to view a diffuse-
reflected beam. Do not dismantle the unit in any
way; doing so may expose laser radiation in
excess of Class 1 limits.
CAUTION – LASER LIGHT IS BRIGHT AND
BLINDING – DO NOT SHINE AT AIRCRAFT
OR VEHICLES AT ANY DISTANCE
Safety information
The following symbol is used in this manual
wherever important safety information is
present.
Before proceeding with any
electrical connection or
operation of the laser system,
refer to the general safety
information listed throughout
this manual.
DECLARATION OF CONFORMITY
The SLM 250 meets or exceeds the
requirements of the following British and
European Standards:
BS EN ISO 12100 : 2010 –
Safety of machinery – General principles for
design
BS EN 61326-1 : 2013 –
Electrical equipment for measurement, control
and laboratory use – EMC requirements
Part 1 – General requirements
The tests were carried out in compliance with:
Immunity to Table 2 – Industrial locations
Emissions to Class A – Industrial locations
BS EN 60825-1 : 2007 –
Safety of laser products – Part 1: Equipment
classification and requirements
The SLM 250 therefore complies with the
following European Directives:
2006/42/EC – Machinery
2004/108/EC – Electromagnetic compatibility
(EMC) of electrical equipment
2006/95/EC – Low voltage directive (LVD)
relating to electrical equipment designed for use
within certain voltage limits (codified version)
It is declared that the equipment named has
been designed to comply with the relevant
sections of the referenced specifications and
is in accordance with the requirements of the
Directives.
Summary of Contents for SLM 250
Page 49: ......
