8-3
Netw
ork set-up
4.
To specify an IP address, click
Use the following IP address
, and then enter the IP address
and Subnet mask settings (see Figure 5).
Connection to a PC/laptop requires the computer to have a similar fixed IP address.
Enter the IP address of the PC/laptop in the section
Use the following IP address
. The IP
address entered should be the same as that of the SLM 250 – except for the last three digits,
which need to be a different number between 1 and 254. This must exclude the IP addresses
currently in use for the SLM 250 unit and other equipment on that subnet.
Click
OK
.
Note:
It is important that both the IP address and subnet mask are entered correctly. Any
deviation from this will result in the PC/laptop and SLM 250 not communicating with each
other.
Figure 5: IP address settings
Summary of Contents for SLM 250
Page 49: ......
