Renesas IE-78044-R-EM, User Manual

Page: 15 / 73

5
CHAPTER 1 GENERAL
1.5 Emulation Probe
The emulation probe is optional. Select the one best suited to your target device package.
Table 1-2 Emulation Probe and Target Device
Emulation Probe Target Device
EP-78024GF-R
µ
PD78023
(64-pin plastic QFP)
µ
PD78024
EP-78024CW-R
µ
PD78P024
(64-pin shrink DIP)
µ
PD78042
µ
PD78042A
EP-78130GF-R
µ
PD78043
µ
PD78043A
(80-pin plastic QFP)
µ
PD78044
µ
PD78044A
µ
PD78045A
µ
PD78P044
µ
PD78P048A
1.6 Notes on correct use of IE-78044-R-EM
(1) Be sure to turn off the power to IE-78000-R and the target system before connecting or disconnecting IE-78000-
R and the target system, and changing the setting of switches.
(2) When emulating the target device by using IE-78044-R-EM and IE-78000-R, the target device operations slightly
differ from those for the actual device. (Refer to CHAPTER 3 DIFFERENCES BETWEEN TARGET DEVICES.)
(3) To input data through the external sense clip, maintain voltage at +15 V.
(4) To output data through the external sense clip, connect a pull-up resistor to the external sense clip on the target
system, because the external sense clip has an open-collector output configuration.
(5) Be sure to connect the emulation probe ground clip to the target system signal ground line.
(6) Pins P8 and P12 cannot be traced as port pins.
(7) 5V must be supplied to the target system as V
DD
.
★