29
CHAPTER 4 SETTING CLOCK
14 13121110 9 8
1 2 3 4 5 6 7
IE-78044-R-EM
74AC541PC
IC1
X1 USRCLK
3
2
1
JP1
②
Prepare the IE-78044-R-EM and the wired break board.
③
Remove the external clock component block from the socket on the IE-78044-R-EM (socket labeled X1 USRCLK).
④
Attach the component block in 1 to the socket (X1 USRCLK) from which the external clock component block
has been removed in step 3. At this time, make sure that pin 1 faces the correct direction.
Fig. 4-7 Component Block Mounting Position (to use a user mounted clock as the main system clock)
⑤
Confirm that the component block mounted to socket X1 (MAIN) on the break board is wired as shown in
Fig. 4-5.
⑥
Connect the IE-78044-R-EM and break board to the IE-78000-R.
The following circuit is configured by the above procedure, and the clock can be supplied from the mounted resonator
to the emulation device.
Summary of Contents for IE-78044-R-EM
Page 54: ......
Page 56: ......
Page 70: ...60 APPENDIX D SYSTEM CONFIGURATION MEMO...
