24
CHAPTER 4 SETTING CLOCK
(1) Clock already mounted on break board
A crystal oscillator has been mounted on the break board, and its frequency is 4.19 MHz.
Fig. 4-2 Using Clock Mounted on Break Board
Remarks
:
The clock supplied by the oscillator on the break board (circled in the above figure) is used.
(2) User mounted clock
A clock meeting specific user specifications can be mounted on the IE-78044-R-EM. Mount the resonator to be
used on the component block, and connect the component block to the IE-78044-R-EM. In this way, the target
system can be debugged at a frequency different from that of the supplied clock.
Fig. 4-3 Using a User Mounted Clock
Remarks
:
The clock supplied by the oscillator on the IE-78044-R-EM (circled in the above figure) is used.
(3) External clock
The external clock on the target system can be used via an emulation probe.
IE-78000-R
Break board
Supplied
oscillator
(used)
Emulation probe
Target system
Oscillator
(not used)
Component
block
IE-78000-R
Target system
IE-78044-R-EM
Resonator
(used)
Emulation probe
Resonator
(not used)
Summary of Contents for IE-78044-R-EM
Page 54: ......
Page 56: ......
Page 70: ...60 APPENDIX D SYSTEM CONFIGURATION MEMO...
