Jaune
Noir
Noir texte
2.7
ENG_UD40461_2
Fonction Stop and Start (X92 - Dacia)
Deactivating, activating the
function
Press
1
to deactivate the function.
Warning light
2
in the switch lights up.
Pressing this again will reactivate the
system. Warning light
2
in switch
1
goes out.
STOP AND START
function (3/3)
The system is automatically reacti-
vated each time the vehicle is started
(see “Starting, stopping the engine” in
Section 2).
Operating faults
If warning light
2
lights up without press-
ing switch
1
, the system is deactivated.
Please consult an authorised dealer.
Before getting out of the
vehicle, you must switch
off the ignition (please see
section on “Starting, stop-
ping the engine”).
Special note: engine on standby,
press switch
1
to restart the engine.
Special feature of the automatic
engine re-start
Under certain conditions, the engine
can restart on its own in order to guar-
antee your safety and comfort.
This can occur especially when:
– the outdoor temperature is too low or
too high (less than around 0 °C or
higher than around 30 °C);
– the battery is not sufficiently charged;
– the vehicle speed is above 3 mph
(5 km/h) (downhill slope, etc.);
– repeated pressing on the brake
pedal or braking system require-
ment;
– ...
1
2
Special note:
Depending on the
vehicle, for some of
these condi-
tions the
automatic restarting of the
engine is inhibited if a front door is
open.