1AB8651.0
Reconnect the computer and the air bag cushion ignition module, then switch on the
ignition. Erase the computer memory, then switch off the ignition. Carry out a check again
using the fault finding tool and, in the absence of a fault, unlock the computer. Destroy the
air bag if there has been a replacement (tool ELE. 1287).
AFTER REPAIR
DF003
present
CONT
None
NOTES
CC.1 - CC.0
Lock the computer using the command on the fault finding tool.
Switch off the ignition and remove the two steering wheel boss mounting bolts.
Check the condition of the trigger cable.
The XRBAG must be used for insulation measurement appropriate to the type of fault at point C2 of the
driver’s front air bag circuit.
If the value obtained is not correct, replace the rotary switch under the steering wheel.
Reconnect the rotary switch under the steering wheel, disconnect the computer connector and fit the 30
track B40 adaptor
.
The XRBAG must be used for insulation measurement appropriate to the type of fault on adaptor cable
A
.
If the value obtained is not correct, check the connections on the 30 track connector (tracks 10 and 11)
and replace the wiring if necessary
FAULT FINDING- INTERPRETATION OF FAULTS
WIRING
Air bags and seat belt pretensioners
88
FRONT
88-34