SLEEP function
The sleep function saves energy while you sleep.
Activate this function by holding down the “Eco”
key [1] for 2 seconds. Press this key before going
to sleep. In cooling mode, the unit automatically
increases the set room temperature by 1 °C after 1
hour. After one more hour, the room temperature is
increased by an additional 1 °C. In heating mode,
the room temperature is decreased within the first
two hours of operation by 2°C. After 8 hours the
Sleep function stops and the unit will operate again
at the last stage that was reached.
This function is not available in the modes recircu-
lation and dehumidification!
1
Fig. 17: "Sleep" function
Setpoint
1 hr
1 hr
Setpoint
+/- 2°C
Fig. 18: Sleep mode
27
