REMKO RVT 265 DC, Operating And Installation Instructions

Page: 26 / 76

Combined TIMER (setting "TIMER ON" and
"TIMER OFF" at the same time)
"TIMER OFF ð "TIMER ON"
(On ð Stop ð Start)
Example:
You want the air conditioning unit to switch off in
two hours from the time it was programmed, and
switch back on ten hours later.
1. Press the "TIMER" key.
2. Press the “+” or “-” key until “10h” appears on
the display.
3. Press the "TIMER" key.
4. Press the “+” or “-” key until "2h" is displayed.
5. Wait for 3 seconds and the temperature
appears again in this area of the digital dis-
play. The "TIMER ON" and "TIMER OFF"
indicators stay lit, and this function is acti-
vated.
Off
Set time
Stop
Start
2 hours later
after setting
5 hours later
after setting
Fig. 15: "TIMER OFF"/"TIMER ON" example
"TIMER ON ð "TIMER OFF"
(Off ð Start ð Stop)
Example:
You want the air conditioning unit to switch on in
two hours from the time it was programmed, and
switch back off five hours later.
1. Press the "TIMER" key.
2. Press the “+” or “-” key until “2.0h” appears in
the "TIMER" area of the remote control.
3. Press the "TIMER" key again.
4. Press the “+” or “-” key again until “5.0h”
appears on the display.
5. Wait for 3 seconds and the temperature
appears again in this area of the digital dis-
play. The "TIMER ON" and "TIMER OFF"
indicators stay lit, and this function is acti-
vated.
Off
Set time
Stop
Start
2 hours later
after setting
5 hours later
after setting
Fig. 16: "TIMER ON"/"TIMER OFF" example
REMKO RVT series
26