background image

REMKO Stainless Steel Chiller 

RKW 1000 INOX / 1600 INOX / 2600 INOX 

3600 INOX / RKW 4500 INOX / 8000 INOX / 9800 INOX  

Contents

                                                         

Page 

  
Unit Description                                                           4 
Safety Hints                                                                 4 
Transport and Packaging                                            5 
Operation                                                                     5 
Maintenance and Service                                            9 
Shutting Down the Unit                                              10 

Alarm Description

                                                      10 

Troubleshooting                                                         11 
Technical Data                                                          12 
Dimensions                                                                13 

Contents

                                                    

Page 

  
Assembly Instructions for Service Personnel       14 

Unit Assembly

                                                       14 

Storage Modules for RKW 3600 to 9800 I

            17 

Cable Remote Control

                                          20 

Electrical Connection                                            21 

Hydraulic System

                                                  24 

Initial Operation                                                     25 
Environment and Recycling                                  26 
Service and Guarantee                                         26

 

Read these instructions carefully before setting up/operating the unit! 

 

Our guarantee becomes null and void if the unit is used, set up  

or maintained improperly, 

or if modifications are made to the supplied unit without our prior consent. 

Subject to alterations! 

Operating Instructions 

G

 

Always keep these operating instructions near or on the unit!

 

G

 

Summary of Contents for RKW 1000 INOX





























Reviews: