5
Transport and Packaging
The unit is shipped in a stable transport box made of
wood and cardboard. Please examine the unit when it is
delivered
Make note of any damage or missing parts on the ship-
ping bill and notify the shipping company and your con-
tract partner.
We do not assume any liability for subsequent com-
plaints.
◊
Operate the units exclusively within the permissible
operating ranges.
◊
Do not expose the unit to direct streams of water
High-pressure cleaners, etc.
◊
Protect the connection lines from being damaged, for
example, by animals.
◊
The unit may only be connected to a correctly in-
stalled and grounded power supply.
◊
Never open the unit housing.
There may cause an electric shock.
◊
Operate the unit only when assembled and for their
intended purpose. Keep in mind that it is dangerous
to remove covers protective grilles, etc., during op-
eration; this can lead to uncontrolled operating situa-
tions.
◊
Never operate the unit in rooms susceptible to explo-
sions. The units are also not suitable for operation in
rooms containing large amounts of dust or aggres-
sive air.
◊
Installation and repair work may only be performed by
authorised personnel.
◊
Cleaning and minor maintenance work made only be
performed by the operator or an authorised person
designated by him in accordance with the instructions
contained in the section "Maintenance and Service".
◊
If the unit is set up outside and is susceptible to being
hit by lightning, the appropriate countermeasures
must be implemented by an authorised company.
Operation
The chiller is operated fully-automatically by an internal
regulation or by an external cable remote control in-
stalled by the customer.
Both types of unit operation allow some parameters to
be changed as well as the water return temperature to
be displayed.
Internal and external regulation
Instructions:
◊
When shipped, the units are packaged in a box and
mounted on a palette.
◊
The units must remain upright and be transported
with suitable means. They must also be adequately
secured from falling over.
◊
If the units are transported to a setup location that is
higher up, such as platforms or roofs, they must be
transported in an upright position as shown below.
Pulling point
Wooden boards to pro-
tect from pressure
CH-DIN regulation
Cable remote control
