background image

6

www.remingtonpowertoools.com

PROTECTIVE BATTERY 
TERMINAL CAP

Do not store or carry battery 
so that metal objects can con-
tact exposed battery terminals. 
For example, do not place 
battery in aprons, pockets, 
tool boxes, product kit boxes, 
drawers, etc. with loose nails, 
screws, keys, etc. without bat-
tery cap.

A protective battery terminal cap is provided 
for use whenever the battery is out of the tool 
or charger. Remove cap before placing battery 
in charger or tool.

6.  An extension cord should not be used 

unless absolutely necessary. Use of 
improper extension cord could result in 
a risk of fi re, electric shock or electrocu-
tion.
a. Two-wire cords can be used with 2-

wire or 3-wire extension cords. Only 
round jacketed extension cords should 
be used, and we recommend that they 
be listed by Underwriters Laboratories 
(U.L.). If the extension is to be used 
outside, the cord must be suitable for 
outdoor use. Any cord marked for 
outdoor use can also be used for indoor 
work. The letters “W” or “WA” on the 
cord jacket indicate that the cord is 
suitable for outdoor use.

b. An extension cord must have adequate 

wire size (AWG or American Wire 
Gauge) for safety, and to prevent loss 
of power and overheating. The smaller 
the gauge number of the wire, the 
greater the capacity of the cable; that 
is, 16 gauge has more capacity than 
18 gauge. When using more than one 
extension to make up the total length, 
be sure each extension contains at least 
the minimum wire size.

CHART FOR MINIMUM WIRE SIZE (AWG) 
OF EXTENSION CORDS NAMEPLATE 
RATING AMPS – 0 – 10.0

SAFETY WARNINGS

1.  This manual contains important safety 

and operating instructions.

2.  Before using battery charger, read all 

instructions and cautionary markings on 
battery charger, battery pack, and product 
using battery pack.

3. 

Do not expose charger to rain or snow.

4. 

Use of an attachment not recommended 
or sold by Remington brand may result 
in a risk of fi re, electric shock, or injury 
to persons.

5. 

To reduce risk of damage to electric plug 
and cord, pull by plug rather than cord 
when disconnecting charger.

Cord

Length

AWG Cord

Size

25 feet

18 AWG

50 feet

18 AWG

100 feet

16 AWG

150 feet

14 AWG

7.  Use only the supplied charger (P/N 

121397-01)when charging. The use of 
any other charger could damage the bat-
tery or create a hazardous condition.

8. 

Use only one charger when charging.

9.  Use only Remington RB18V1 or 

RBE18V1 battery packs with this prod-
uct.

10.  Do not attempt to open the charger. There 

are no customer serviceable parts inside. 
If damaged, call DESA Power Tools 
Technical Service.

11. DO NOT incinerate the battery pack 

even if they are severely damaged or 
completely worn out. The batteries can 
explode in a fi re.

12.  A small leakage of liquid from the battery 

pack cells may occur under extreme us-
age, charging, or temperature conditions. 
This does not indicate a failure. However, 
if the outer seal is broken and this leakage 
gets on your skin:
•  Wash quickly with soap and water.
•  Neutralize with a mild acid such as 

lemon juice or vinegar.

•  If the battery liquid gets in your eyes, 

fl ush them with clean water for a mini-
mum of 10 minutes and seek immediate 
medical attention.

MEDICAL NOTE: The liquid is 
a 25-35% solution of potas-
sium hydroxide.

RECHARGEABLE BATTERY

WARNING

To reduce the risk of injury, 
charge only Remington brand 
batteries. Other types of bat-
teries may burst causing per-
sonal injury and damage.

 CAUTION

Summary of Contents for BB18125A









































Reviews: