Supplied By www.heating spares.co Tel. 0161 620 6677
21
Remeha Gas 360 S
20/07/05 - 300005180-001-A
1.2
Cleaning main burner and ignition burner
The main burner and the ignition burner injector with its filter must be
regularly cleaned to ensure good performance. We recommend
doing this at least once a year.
Main burner
- Switch off the boiler electrical power supply
- Cut the gas supply
Do not use a metal brush.
On reassembly, replace the burner earth wire 5 fixed to the right
holding nut on the burner drawer.
Ignition burner
- Re-attach the supply tube (14 spanner)
- Check the position of the ionisation probe 16, the ignition electrode
gap 9 and the position of the flame diffuser 17 in terms of the sizes
indicated on the drawing (required in the event of heater
malfunction).
After reassembly, check for leak tightness.
1.3
Painted surfaces
The painted surfaces can be cleaned with tepid or cold soapy water.
Wipe the painted surfaces with a soft cloth or a damp sponge.
1 Remove the front panel
2 Disconnect the valve connectors under the control panel
3 Position the component holder plate on the studs on the casing
4,
5
Remove the burner drawer held by 4 nuts + washers
6 Clean the burner with a brush, a vacuum cleaner or a blower
7 Unscrew the connecting nut (14 spanner)
8 Pull the gas supply pipe towards yourself
9
Take out the injector and the filter. Clean the filter and the ignition
burner injector. We recommend doing this at least once a year
