RP3000 Radio Modes
- 7 -
Program Download
1) Connect the radio with the PC through download cable, after two seconds, the radio enters
download mode. LED glows orange.
2) You can update software and provide second development feature for the user via PC update
program. LED flashes orange during program download.
All Reset Mode
Turn on the power while holding down PTT and programmable key A simultaneously (or short circuit the
two SELF points) to enter all reset mode. The EEPROM data is all reset. A BEEP sounds and LED
glows orange when All Reset is complete.
Adjustment Mode
Turn the power on while holding down PTT and programmable key C, after two seconds, the radio
enters adjustment mode. LED glows orange. Rotate channel selector knob to select corresponding test
item. Hold down PTT key to switch between wideband and narrowband. Briefly press PTT to transmit or
switch among center, low and high frequency. Briefly press A key to save data. Press B key to adjust
upwards and C downwards.
CH1-CH16 are defined as following:
CH1: Transmitting VCO; CH2: Receiving VCO;
CH3: CTCSS balance; CH4: Frequency Accuracy;
CH5: High power; CH6: Low power;
CH7: CDCSS balance; CH8: MIC sensitivity;
CH9: Maximum frequency deviation; CH10: CTCSS deviation;
CH11: CDCSS deviation; CH12: TONE deviation;
CH13: Receiving sensitivity; CH14: Squelch level;
CH15:
Low battery alert level;
CH16: VOX sensitivity.