RP3000 Adjustment Description
-17-
3. Destination
Set
Connect the radio with the computer via programming cable. And then turn the power on. LED glows red.
Set “frequency range” on the programming software interface. And then click “Programme”
→
“ Writing”.
4. Factory
Setting
The compander is open. Squelch level 2. Adjustment mode is disabled.
Adjustment Method
1) Turn the power on while holding down PTT and programmable key C, after two seconds, the radio
enters adjustment mode.
2) CH1-CH16 are defined as following:
CH1: Transmitting VCO;
CH2: Receiving VCO;
CH3: CTCSS balance
CH4: Frequency Accuracy;
CH5: High power;
CH6: Low power;
CH7: CDCSS balance;
CH8: MIC sensitivity;
CH9: Maximum frequency deviation;
CH10: CTCSS deviation;
CH11: CDCSS deviation;
CH12: TONE deviation;
CH13: Receiving sensitivity;
CH14: Squelch level;
CH15:
Low battery alert level;
CH16: VOX sensitivity.