RP3000 Brief Introduction
- 4 -
(8) Microphone
Used to input sounds.
(9) External Jack
Used to connect with external earphone or programming cable.
(10) Belt Clip
Used to clip the radio on your belt.
(11) Battery Pack
(12) PTT key
Hold down PTT, radio operates in transmit mode. Release PTT, radio returns to receive mode.
(13) Programmable Key [B]
(14) Programmable Key [C]
The following table shows the key function when short pressed, long pressed and held down:
Key function
Key Function
Short Press
Long Press
Hold Down
Emergency Siren
Enable emergency siren
Disable emergency siren
－
Monitor
－
－
Monitor
Scan Enable/Disable
scan Enable/Disable
scan
－
Nuisance Delete
Delete nuisance channel
in scan
Delete nuisance channel in
scan
－
Select High/Low
Power
Select High/Low Power
Select High/Low Power
－
Repeater/Talk Around
Select Repeater or Talk
Around Mode
Select Repeater or Talk
Around Mode
－
Repeater/Reverse
Frequency
Select Repeater or
Reverse Frequency Mode
Select Repeater or
Reverse Frequency Mode
－
Call
Transmit a Call
Transmit a Call
－
Selective Call
Transmit Selective Call
Transmit Selective Call
－
Group Call
Transmit Group Call
Transmit Group Call
－
Vibration
Toggle Vibration On/Off
Toggle Vibration On/Off
－
Note: You can program emergency siren feature to [A] key only. Once [A] key is programmed as
emergency siren key, you can’t program it with other features. Monitor feature can be programmed to [B]
or [C] key only. After programmed as monitor key, [B]/[C] key can’t be programmed with other features.