Reiner jetStamp graphic 970 Operating Manua Download

Page: 58 / 94

PCset graphic Help 970

ERNST REINER GmbH & Co. KG

Inactive object

Function

Description

Copy

Copies the object.

Edit

Object becomes active and can be edited.

Generate graphic

Converts the text to a graphic.

Note: the text cannot be edited anymore after conversion.

Delete object

Deletes the object.

5.6.1.3

Generate graphic

Text and barcode objects can be converted to graphics. Graphics are fixed and cannot be
moved. Limited editing is possible via the additional function "Selection".

Click object with the right mouse button.
Select "Generate graphic".
The object is converted into a graphic.

5.6.2

Date/Time

Font, font style, font size ("

Font

") and format can be set.

The date/clock time format can be globally preset.

Additionally, deviating settings can be performed for every single date/clock time object
("

Context menu date/clock time object

").

A maximum of five date/time objects can be placed

Presettings

Context menu date/time object

Summary of Contents for jetStamp graphic 970































































































Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands

Reiner jetStamp graphic 970, Operating Manua

Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands