Reiner jetStamp graphic 970 Operating Manua Download

Page: 57 / 94

The Software Application PCset graphic

ERNST REINER GmbH & Co. KG

To open the context menu, right-click the desired text object.
The context menu opens as in the following figure.

Function

Description

Undo

Undo the input.

Cut

Cuts out the selected area.

Copy

Copies the selected area.

Paste

If there is a text in the clipboard, it will be pasted.

Delete

Deletes the selected area.

Select all

Marks the entire text.

Text format

To change the font.

Generate graphic

Converts the text to a graphic and fixes it at the current position.

Note: the text cannot be edited anymore after conversion.

Delete object

Deletes the object.

Press Ctrl+Enter to jump to the next line.
Enter or double-click fixes the object, which then can no longer be edited.

Summary of Contents for jetStamp graphic 970































































































Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands

Reiner jetStamp graphic 970, Operating Manua

Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands