Reiner jetStamp graphic 970 Operating Manua Download

Page: 66 / 94

PCset graphic Help 970

ERNST REINER GmbH & Co. KG

Numbering machine

The number of the selected numbering machine object (1-5) is
displayed.

Link to number circle

Each numbering machine (1-5) is first linked to a separate number
circle (1-5).

If several numbering machine objects are placed, the numbering
machine selected can be linked to the number circle of another
numbering machine. The dedicated number circle is rendered
inactive by this.

The link is used to synchronise the counter reading of different
numbering machines.

Each printing system of a linked numbering machine updates the
counter reading of the shared number circle.

Copy

Copies the object.

Numbering machine format

Opens the numbering machine configuration window for the
selected numbering machine.

The numbering machine range can also be set deviating from each
other for numbering machines that are linked to a shared number
circle.

Settings for the number circle can only be made here when the
selected numbering machine is linked to the dedicated number
circle.

Delete object

Deletes the object.

Summary of Contents for jetStamp graphic 970































































































Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands

Reiner jetStamp graphic 970, Operating Manua

Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands