Reiner jetStamp graphic 970 Operating Manua Download

Page: 12 / 94

PCset graphic Help 970

ERNST REINER GmbH & Co. KG

3.3

Safety Notes

Possible blinding in case of contact between ink and eyes.

Never hold the

jetStamp graphic

970 with its nozzles pointing at the face of persons!

Possible tripping and damage to the device from device lines placed freely in the room.

Place the device lines so that they do not pose any danger source!

Damage to the device due to improper transport.

Only use packaging that provides protection from impact and shock to the device!

Damage to the device by moisture.

Before commissioning, wait until device has reached room temperature and is completely dry!

3.4

Secure Handling of Print Cartridges

Possible blinding in case of contact between ink and eyes.

Never hold the

jetStamp graphic

970 with its nozzles pointing at the face of persons!

Damage to health from swallowing the ink.

Do not swallow!
Keep the print cartridge away from children.

Summary of Contents for jetStamp graphic 970































































































Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands

Reiner jetStamp graphic 970, Operating Manua

Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands