Reiner jetStamp graphic 970 Operating Manua Download

Page: 59 / 94

The Software Application PCset graphic

ERNST REINER GmbH & Co. KG

5.6.2.1

Presettings

Changed presettings apply to all future date/time objects.

In the menu bar

select the "Presettings" tab and click "Date/time".

The configuration window for "Date and time" opens as shown in the following figure:

Function

Description

Predefined date and time formats

List of preconfigured formats.

Selection by clicking.

User-defined date and time formats

Shows the selected format in the draft view.

The format can be manually configured.

One abbreviation of a category each from the
following table "Format abbreviation" can be used
once.

Additional characters (also spaces) are inserted by
being included in simple apostrophes (').

For verification, the text is written in "red" once the
entered format is no longer OK.

Preview

Preview of the selected format with the current
system date.

Time offset

The configuration of an offset for date and time can
be used, for example, to automatically calculate
expiration dates.

Summary of Contents for jetStamp graphic 970































































































Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands

Reiner jetStamp graphic 970, Operating Manua

Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands