PAGE 9
3 GREEN FIT Application
Using the software of the GREEN FIT controller, you can make vehicle-specific settings and read out informa
-
tion on the system.
NOTICE
The figures shown in these instructions have been created on a GreenStar terminal GS3 2630
using software version 3.36.1073.
3.1 GREEN FIT Icon and its different Statuses
The GREEN FIT application is represented by a but-
ton with “GF” labeling and a steering wheel icon
(see Fig. 2).
Depending on the status, the button can have dif-
ferent colors:
(Button is red): An error occurred.
Steering is disabled.
(Button is beige): Steering is swit-
ched on and ready for activation
of the automatic steering.
(Button is green): Automatic
steering is enabled. The vehicle
is actively steered.
3.2 Warning Messages
When starting up the terminal and whenever an error
occurs, warning messages are issued by GREEN FIT
(see for example Fig. 3).
Please refer to the list of error codes (see Chapter 4),
to find out how to proceed in such a case.
Press the ESC key (I) to hide the error message.
Fig. 2:
GREEN FIT icon in the GreenStar terminal
Fig. 3:
Warning screen