PAGE 14
3.5.2 Teach Basic Settings (ISOBUS Delay Time)
In the basic settings you can set the delay time of the
power supply for ISOBUS devices after the ignition
is switched off. This ensures that the John Deere
terminal shuts down correctly, even if the vehicle
does not provide a standard delay time.
Tap the gear symbol (M) in the Teach menu to call
up the basic settings (see Fig. 12).
Select the desired delay time via the field under „ISO
Maintain Power“ (see Fig. 13).
A setting of 60 seconds is recommended for vehic-
les without standard delay time.
Fig. 12:
Accessing the “Teach basic settings” menu
Fig. 13:
Setting delay time