Reichhardt GREEN FIT, Original Operator'S Manual, Page: 30 / 32

PAGE 26
Error-No. Level Description Cause Troubleshooting
2384 21 AUX Function – No Response
from VT
VT has not response the assign-
ment.
contact Reichhardt support
2385 21 AUX Function – Function ID not
supported
ISO-Lib doesn‘t support a function
ID.
contact Reichhardt support
2386 21 AUX Function – Different Types Function type and inpunt types are
not the same.
contact Reichhardt support
2387 21 AUX Function – Can not stored Assignment can not be stored. contact Reichhardt support
2388 21 AUX Funktion – Input Unit Input Unit invalid contact manufacturer of input unit
2389 21 AUX Funktion – Input Unit Function from input unit are invalid contact manufacturer of input unit
2390 21 AUX Funktion – Unknown error Any other error contact Reichhardt support
2410 21 engagement denied by krone
machine
operator tried to engage by
footswitch or terminal
operator has to engage by joystick
3001 22 vehicle code for vehicle 1 is
invalid
wrong vehicle code is set up, or no
vehicle code entered
dial in a valid vehicle code for
vehicle 1
3010 22 Left axle position is not cali-
brated
left axle position is not calibrated teach left axle positon
3011 22 Center axle position is not
calibrated
center axle position is not calibra-
ted
teach center axle position
3012 22 Right axle position is not
calibrated
right axle position is not calibrated teach right axle position
3013 22 Current controller is not cali-
brated.
Current controller is not calibrated. Teach current controller.
3014 22 Pressure sensor is not cali-
brated.
Pressure sensor is not calibrated. Teach pressure sensor neutral posi-
tion.
3017 22 GPS receiver height is not
calibrated
GPS receiver height is not calibra-
ted
teach mounted height of GPS-receiver
3018 22 GPS receiver offset left/right is
not calibrated
GPS receiver offset left/right is not
calibrated
teach left and right offset of GPS-re-
ceiver center position
3019 22 GPS receiver look ahead is not
calibrated
GPS receiver look ahead is not ca-
librated
teach look ahead of GPS-receiver
3020 22 Joystick is not calibrated Joystick is not calibrated teach analog signal center position for
joystick
3030 22 Travel Direction is not set
correctly
Teach value of “axle type“ and
“travel direction type“ doesn‘t
match. When travel direction is
“ gps“ then axle type has
to be “wheel angle sensor“.
- change axle sensor type
- change travel direction type
3050 22 No ISO-VT present No ISO-VT connected or switched
on.
check cables from GREEN FIT control-
ler and ISO-VT.
4000 21 No communcation to Terra
Variant
no CAN information is received
fromTerra Variant
- check cables from GREEN FIT con-
troller to Terra Variant
- check vehicle code
4010 21 No communcation to Kubota
M7 VCU1
no CAN information is received
from M7 VCU1
check cables from GREEN FIT control-
ler to Kubota Tractor
4011 21 No communcation to Kubota
M7 VCU2
no CAN information is received
from M7 VCU2
check cables from GREEN FIT control-
ler to Kubota Tractor
4012 13 Invalid resume switch state
with Kubota M7
invalid resume switch state - check cables from GREEN FIT con-
troller to M7 VCU2.
- check resume switch