13
1400500-101 Rev. A
Instrument Setup
(continued)
Setting Up the DENSITY4/5
Connecting DENSITY4/5 to power supply
• Connect the power cord to an electrical socket which has the power requirements as indicated on the
data plate of the DENSITY4/5.
• Connect the power cord to the AC Input connector on the back of the DENSITY4/5.
• Turn the device ON by switching the toggle switch (Power Button) to the ON position.
Connecting Air Cartridge
Use the screws provided and align and attach the two metal clips provided onto the back side of the DEN-
SITY4/5 to accept the Air Cartridge. Remove the Air Cartridge from its shipping bag and install it between
the two clips to secure it on the back of the DENSITY4/5.
Figure SU-01, DENSITY4/5 Parts
Screw
Holes
Using the hose and connectors delivered with the DENSITY4/5, connect the outlet side of the Air Cartridge
to the rear of the device.
Figure SU-02, Attached Air Cartridge
-continued-
