+
43
B1
Turn ON the isolation switch.
Make sure that both drive units have been discon-
nected from the vehicle tyres.
Put a suitable key or adapter (19 mm) on the
hexagonal bolt in the lateral opening of the drive
protective cover. Turn the spindle as long enough
until you can see the green marking completely
i
(= ON). An additional mechanical stroke sig-
nals the respective final position.
Repeat this procedure for the second axle until all
4 drive units are properly placed at the tyre.
Undo the handbrake of your caravan.
B3
Turn off the MoveControl by pushing the I/O
button once. The LED of the remote control will
go out.
Attention: if the motors don't work, either the unit
must be reset or the remote control may have to
be re-adjusted to the receivers (E-boxes).
Take your caravan or trailer outdoors. We sug-
gest you choose a large area with sufficient safety
margin to people and objects until you have
enough experience in operating the MoveControl.
Activate the MoveControl by means of a
double click on the I/O key at the remote
control (ON) - the LED will be lighting.
Check the function of the MoveControl by
pushing the buttons on the remote
control.
6. Startup/ Operation
c
B2 Turn ON MoveControl
B4 Manual engaging of the friction
rollers (without MotorDrive):
B5 Automatic engaging of the
friction rollers (with optional
MotorDrive) :
If your MoveControl is equipped with MotorDrive,
approach of the driving rollers to the tyres should
be effected by means of the remote control.
Simultaneously push the two arrow keys on the
remote control and keep them pressed until the
driving rollers are completely extended:
As soon as the final position is reached, the
MotorDrive will be switched-off automatically and
the green mark is completely visible.
Only in this position the moving process is
allowed to!
Undo the handbrake of your caravan.
Activate the MoveControl by means of a
double click on the I/O key at the remote
control (ON) - the LED will be lighting.
Now you can execute the
movements according to the
symbols shown on the remote
control. The vehicle only
moves as long as you keep the
buttons pushed down.
B7 Moving
B6 Turn ON MoveControl
If no key should be actuated within 20 seconds,
the remote control will be switched-off automati-
cally and must be switched-on again.
4@.$UXJO@.#"
4@.$UXJO@.#"
Summary of Contents for 527-0541
