REICH 527-0541, Installation Instructions Manual

Page: 37 / 68

Index
1. Product description
2. Security advices
3. Mounting situation
4. Installation - mechanical
5. Installation - electrical
6. Startup / Operation
Appendix
A1 Synchronization
A2 Reset
A3 Maintenance
A4 Comments and tips
A5 FAQ
A6 Terms of Warranty
A7 Declaration of
Conformity
Photo Index
c Remote control handset
d Changing battery
e Installation Twin
f Installation in front of the axle
g Installation behind the axle
h
Installation synchronus bar
i Engaging / Disengaging
the friction rollers
j Mounting Dimensions
k Scope of delivery
l Wiring diagram
1. Product description
The MoveControl Twin 4WD is one of a range of
technical products produced by Reich GmbH. The
moving device was designed and manufactured
based on practical experience and with greatest
dilligence.
The MoveControl Twin 4WD is clamped onto the
chassis of the caravan or trailer. Before moving,
the left and the right drive unit, each, are simply
engaged onto the tyres. After moving they are
released from the tyres.
There are four powerful 12 V electric motors
which enable you to manoeuvre the caravan or
trailer. The remote control allows effortless and
safe moving. Symbols on the remote control show
you the driving direction.
In this manual, the term "MoveControl Twin 4WD"
has been abbreviated to "MoveControl" to facili-
tate reading and to get a better overview.
Special Feature Conversion Set:
The drive units are identical to those of the single
axle version. The electronic boxes and the remote
control are differing in the unit structure, as well
as in operation.
If the single axle version is retrofitted with the
extension set to a twin version, the electronic
boxes and the remote control must be replaced.
37
4@.$UXJO@.#" 4@.$UXJO@.#"