MANUAL TEST FUNCTIONS
50
RF Analysis
RF analysis is broken into 3 testing functions:
1.
RF Level
2.
RF Spectrum
3.
RF Antenna Level
The RF Level function is a broadband detector analysis that covers a frequency range to
600MHz, the RF Spectrum function is a spectrum analyzer function to 85 MHz and the RF
Antenna Level function is to be used with the supplied antennas to a frequency range of 8 GHz.
Broadband Line RF Level Analysis
Select the RF Level test to access the screen below.
In this screen, all pairs were tested for general broadband RF energy. As you can see from the
screen in this example, all pair combinations containing a 4 or 5 contain reasonable RF energy.
This is because pair 4:5 in this particular system is active and currently communicating with the
phone handset. The time level graph plots the changes in broadband level over time. In this
example, the data was captured by automatically switching through the pairs so the time graph
roughly reflects the same data as shown in the bar graph representation of each pair.
