REHM FOCUS.ARC P 250, Operating Instructions Manual

Page: 80 / 82

80
EC declaration of conformity
For the following named products
MIG/MAG impulse welding systems
FOCUS.ARC P 250
FOCUS.ARC P 300
FOCUS.ARC P 350
FOCUS.ARC P 400
FOCUS.ARC P 450
it is hereby confirmed that they comply with the essential protection requirements which are laid down in
the Directive
2004/108/EU (EMC Directive) of the council on the approximation of the laws of the Member
States relating to electromagnetic compatibility and in the Directive 2006/95/EU relating to electrical
equipment designed for use within certain voltage limits.
The above products comply with the requirements of this directive and comply with the safety requirements
for arc welding units in accordance with the following product standards:
EN 60 974-1: 2006-07
Arc welding equipment - Part 1: Welding current source
EN 60 974-2: 2003-09
Arc welding equipment - Part 2: Liquid cooling systems
EN 60 974-5: 2003-02
Arc welding equipment - Part 5: Wire feed device
EN 60974-10: 2004-01
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
according to the EC. Directive 2006/42/EC article 1, paragraph 2 the above mentioned products fall
exclusively within the scope of the directive 2006/95/EC relating to electrical equipment designed for use
within certain voltage limits.
This declaration is given for the manufacturer:
REHM GmbH u. Co. KG Schweißtechnik
Ottostr. 2
73066 Uhingen
Uhingen, 18/02/2019
submitted by R. Stumpp
Managing Director