Function description
24
5
Corner menu functions
5.1 Corner menu welding processes
(top left)
The corner menu [
BF1
] is used to select the welding processes
•
MIG/MAG (MSG inert gas metal welding)
Turning and pressing the rotary encoder [Fig. 10] selects and confirms the
process. Pressing the button [
BF17
] "Back or "Rehm" returns to the main screen
5.1.1 Conventional MIG/MAG(MSG) welding
With continuous MSG welding, very different material transitions and also
different types of arc occur depending on the selected arc power and the inert
gas used, see also Section 5.4 (welding process).
5.2 Corner menu operating mode
(top right)
The menu Operating modes [
BF2
] is activated by pressing the button at the top
right of the keypad Fig. 10 This allows the selection of the operating modes
1. 2 cycle
2. 2 cycle with slope-down (Slope)
3. 4 cycle
4. 4 cycle with slope-down (Slope)
5. Spot
6. Spot with slope-down (Slope)
7. 2 cycle interval
8. 2 cycle interval with slope-down (Slope)
.
Summary of Contents for FOCUS.ARC P 250
