│
16
Regulus CSE2 MIX F W 1F - www.regulus.eu
APPENDIX – AVC ACTUATOR ADJUSTMENT
– The actuator is set and ready for operation from the production
– The instructions apply only if the actuator had to be removed e.g. to be replaced
1.
When fitting the actuator, turn the
D-shaft in such a manner that the
valve member is between inlets 2
and 3.
2.
Fit the plastic adapter on the shaft.
The flat edge of the shaft and the
arrow on the plastic adapter are
located on the same side as the valve
member.
valve member position
D shaft
D shaft
valve member
position
arrow on
plastic adapter
