13
│
Regulus CSE2 MIX F W 1F - www.regulus.eu
4. PUMP STATION INSTALLATION
The load unit is designed to be mounted on a wall or a manifold with 125 mm connection
pitch. In the rear section of the insulation there are two mounting holes for fixing the metal
plate to the wall. Mounting holes pitch is 175 mm.
Installation dimensions are shown in the figure below.
The package includes a mounting kit that is used to fix the pump station to the
intended place.
The mounting kit includes:
Screw 5x50, round head
2 pcs
6.4 stainless steel washer, DIN 9021/A2
2 pcs
Wall
plug
8mm
TX
2
pcs
340
360
125
245
