7
│
Regulus CSE2 MIX F W 1F - www.regulus.eu
PUMP CONTROL
Constant speed operating mode and pump performance curve III are preset as
factory settings for the PARA SC pump. After switching on, the pump runs at the
factory setting or at the last setting. The settings can be changed using the operating
button, see below.
Briefly press the control button to:
select the pump operating mode: constant speed, Δp-v
or Δp-c and the pump performance curve (I,II,III).
Press and hold the operating button for the specified time to activate:
- Pump venting function - hold the control button for 3 seconds.
- Manual restart - hold the operating button for 5 seconds.
- Locking/unlocking the operating button - hold the button for 8 seconds.
- Factory setting - hold the control button for at least 4 seconds and switch off the
pump by disconnecting it from the mains.
SETTING THE PUMP SPEED CONTROL MANNER
Briefly press the operating button for 1 second to select the pump speed control manner
and pump performance curve. LEDs show pump settings (operating mode Δp-v / Δp-c
/ n=const and the respective performance curve).
LED indicators Operating mode Performance curve
constant speed
constant speed
Δp-v variable
Δp-v variable
Δp-v variable
Δp-c constant
Δp-c constant
Δp-c constant
constant speed
OPERATING BUTTON
