V
09/2011
4
•
General Safety Information
Temperature Control Unit 300L(D)/350L(D)
Burning thermal oil can be extinguished using an AFFF spray foam fire
extinguisher, a powder fire extinguisher (to be avoided in the case of
dust-sensitive plants, control systems, EDP, etc.) or a CO
2
fire extin-
guisher. The appropriate fire extinguisher must be provided by the opera-
tor, taking into account the equipment located in the room and the man-
datory safety regulations.
The temperature control unit may only be operated when all safety sys-
tems are completely installed and intact.
The temperature control unit must be protected against sprays and clean-
ing agents.
Before detaching connecting lines from the temperature control circuit
and depending on the outlet temperature, allow the temperature control
unit to cool down first and then switch it off. Check that the pump is no
longer running.
WARNING
Important - danger of injury in the event of escaping water or oil!
Using This Documentation
This documentation contains important information for safe, economical
operation and for proper maintenance of the device.
Compliance with this documentation helps to avoid danger, minimise re-
pair costs and downtime, and increase the dependability and service life
of the device/system.
NOTE
The operating instructions should be kept near the corresponding de-
vice/system and always be accessible to operating and maintenance personnel.
Additional Documentation
The included documentation is completely correct for the basic versions
of devices. Components that do not belong to the basic hardware are no-
ted as extra equipment. The corresponding additional documents are in-
cluded with special versions of devices. Any additional documents sup-
plement and/or replace the descriptions contained in this documentation,
which are then either invalid or only conditionally valid.
