![background image](http://html1.mh-extra.com/html/regintech/m-office/m-office_user-manual_1434329072.webp)
72
4.5.1 PBX mode forward
PBX mode option needs to be checked.
Extension table
setting is basic and
required.
Welcome IVR
and
Forward to any call
are optional settings. M-office
can be run at PBX mode during office hours and switched to Forward mode after
office hours by enable
Set Skype status for office off-hours and Skype forward.
Skype has DTMF sending problem during a Skype to Skype call for recent Skype
versions. M-office can support incoming Skype calls for any Skype, SkypeOut or
PSTN number call forward under Skype version 7.17~7.32(Only Skype
7.16.0.102 or earlier version can support incoming Skype calls for
Skype/SkypeOut forward now.). But user needs to manually set the provided
Skype account direct-forwarded to the Skype account running with M-office.
Whenever the provided Skype account gets any call, the call will be
direct-forwarded to the M-office Skype account. And the caller can do any call
forward. Although Skype announced Skype won
’t support Skype version earlier
than 7.16 after 03/01/2017, but we still can install Skype 7.16.0.102 in some PC
for M-office application. With Skype 7.16.0.102, user just needs one Skype
account running with M-office. There is no need to have an extra Skype account
set for call forward to M-office Skype account as just mentioned above. For more
details, you can refer
4.5.2 Forward to any call
Incoming Skype calls for any
forward
.
In the future, if Skype adds support for DTMF sending during a Skype to Skype
call, there is no need to have an extra Skype account set for call forward to
M-office Skype account. We will have such update accordingly then.
Delay until landline call forwarded
Setting of
“Delay until landline call forwarded” is only for landline incoming calls. It
doesn
’t apply to incoming Skype calls. If user wants to use forwarding function
and also wants to pick up the incoming landline call directly when he/she is near
the phone. User can consider to use the attached one 1 to 2 female phone plug
jointer to connect carrier landline(or PBX analog extension line), phone(or PBX
extension phone) and M-office RJ 11 port as below figure. With
“Delay until
landline call forwarded
” set at appropriate number like 3 seconds, the incoming
call will be forwarded if user doesn
’t pick up the paralleled phone within 3 seconds.
The
“Delay until landline call forwarded” time can’t be set too long; otherwise,
landline caller might hang up calls because of long wait. It is good to have the
setting at 0 when you are far away from M-office, then the incoming landline calls
will be forwarded immediately. The default setting is 0 second.
Summary of Contents for M-office
