Regency Gemfire™ Gas Fireplace
39
INSTALLATION
SCREEN & DOOR FRAME OVERLAY INSTALLATION
918-827a
12/15/11
1)
Orient the safety screen so the raised part of the screen faces up.
2)
Place the screen into the back side of the door frame as shown
below.
3)
Hold the screen in place in door frame as shown below -
install door frame with screen onto unit.
5)
Door frame and screen installed on the Gemfi re 54.
4)
Install the door frame overlay by hooking the top fl ange over top of
the glass door, push in the bottom of the door frame overlay to secure
in place.
Door Frame
Overlay
Screen
Glass Door
Warning:
Turn off the unit by way of the wall switch or remote.
Allow unit to cool at least 10 min. - prior to removing
faceplate.
6)
Place 2 of the supplied magnets on the lower corners of the Door
Frame Overlay, this will keep the Faceplate in position after it has
been installed.
Before you start:
Stainless must be inspected for scratches and dimples prior to installation. All claims to be recorded at this time. Claims for damage after
installation will not receive consideration.
To protect the fi nish during installation and handling
- cotton gloves
MUST
be worn at all times while handling the panels (even when
removing protective coating).
Stainless will discolor a little during normal operation. This is normal and should not be considered a defect.
All hand and fi nger marks
MUST
be cleaned off with a soft cloth and a stainless steel cleaner. Most stainless steel cleaners leave a fi lm/
residue on the surface of the panels. Use an ammonia based cleaner (ie. glass cleaner) to remove this fi lm before applying heat to the unit.
Failure to do this may result in burn stains which you will be unable to remove.
This is not a warranty item.
Magnet Position
1
GEMFIRE 54
SCREEN AND DOOR FRAME OVERLAY INSTALLATION
