Regency Gemfire™ Gas Fireplace
31
INSTALLATION
2
04/23/09
918-798
GEM54
Burner tray extenders
9)
After extenders have been removed. Remove the 2 screws that
secure the burner tray, at the base of the fi rebox.
10)
Slide the burner to the left and lift it out.
11)
With burner removed - lift out burner tray.
Burner Bracket
Location of screws securing burner
7)
Loosen 6 screws that secure the burner extenders. on burner tray,
located behind the burner on either side of the pilot assembly.
8)
Lift out the 2 burner tray extenders.
Burner tray extenders
Burner tray
14)
Remove burner orifi ce with a 1/2" wrench and discard. Use
another wrench to hold on to the elbow below
the orifi ce (see below).
Pilot Cap
Pilot Orifi ce
12)
Pull off the pilot cap to expose the pilot orifi ce. (see below)
13)
Unscrew the pilot orifi ce with the Allen key and replace with the
LPG pilot orifi cein the kit and replace pilot cap (see below).
15
)
Reinstall new burner orifi ce LPG stamped #51 or ULPG burner
orifi ce stamped # 52 and tighten.
