RC500E
|
53
installation
919-881
07.04.18
7
Glass Crystal amount
Log 7 placement
Glowing wool placement
Flame picture
Log 6 install
Log 7 install
14. 3lb of glass crushed glass installed on the burner - there will be
1/2lb leftover.
15. Install Log 6 onto Log 2 & 4. Log 6 will rest in the notch on Log 2 and
the pin locator on Log 6 should line up with the pin on Log 4.
16. Install Log 7—the darker end will rest in the notch on Log 5 and the
opposite end will rest on the bed of crushed glass on the burner.
17. Log 7 should touch Log 3 when in position, as shown below.
18. Place the glowing wool on the crushed glass as shown below.
Note: If the flame picture on the unit is not satisfactory, move the crushed
glass away from the burner ports as shown below.
6
3
RC500E
Summary of Contents for Contura RC500E
Page 67: ...RC500E 67 notes ...
Page 71: ......
