Regency Fireplace Products Liberty LRI4E-LP, Owners & Installation Manual

Page: 39 / 64

LRI4E / HRI4E Direct Vent Gas Insert
|
39
|
39
installation
OPTIONAL MANTEL DEFLECTOR INSTALLATION - LOW PROFILE
Note
: A mantel delector may be installed to reduce the minimum mantel
height. Refer to minimum clearances in the installation manual.
1.
Line up the mantel delector (tabs to the back) with the Faceplate Back
-
ing Plate.
Installed mantel delector
Mantel Delector
A mantel delector may be installed to reduce the minimum mantel height.
Refer to minimum clearances in the installation manual.
. Line up the mantel delector (tabs to the back) with the Outer Faceplate.
Secure in place with three screws prior to installing outer faceplate.
Note:
Faceplate may be installed after the unit is in its inal position.
Low Proile Faceplate
LRI4E/HRI4E Onl
y
2.
Bend all 3 tabs 90
º
to secure the delector to the top of the backing plate.
The tabs should be lush with the underside of the top lip of the back plate.
Top of backing
plate