Regency Fireplace Products Contura Ri50, Owners & Installation Manual

Page: 23 / 84

Use the cross in the floor panel as an indication to the
location of the flue outlet.
Position the floor section and check that the minimum
permitted distance to combustible material is kept.
Measure to the centre of the floor section.
The rear edge of the floor section should align with the
complete rear edge of the surround.
Ensure the floor base is secured to the floor prior to
setting unit into place. See page 20 for details.
The fireplace can be positioned tight to the
wall behind, if using a masonry chimney.
When installing against non-vertical walls
to facilitate installation it is recommended
that a small gap is left between the wall
and fireplace. Lay the floor section a slight
distance from the wall behind, and align the
position of the holes in the ceiling for the
chimney lead-in with the same dimensions.
Levelling leg positioned
to the rear as shown on
floor panel.
Cross in floor
36 ¼"
931 mm
!
EN
23
1
3
2
Steel surround installation
installation