Regency Fireplace Products Contura Ri50, Owners & Installation Manual

Page: 15 / 84

Rain Cap
Storm Collar
Roof Flashing
Attic Radiation Shield
Minimum Air Space
in accordance with chimney listing
Chimney Connector
Chimney Sections
Roof Radiation Shield
(if required)
Non-Combustible
Floor Protector
Existing Floor
(Combustible)
Rain Cap
Storm Collar
Wall Support
Insulated Tee
Roof Flashing
Chase (Optional)
Minimum Air Space
in accordance with chimney listing
Chimney Connector
Chimney Sections
*M
in. 6
"
M
in. 56
-3/4”
to c
en
ter
line
Roof Radiation Shield
(if required)
Non-Combustible
Floor Protector
*When using double wall pipe
Existing Floor
(Combustible)
Horizontal Installation
(Rear or Top Exit)
Standard Ceiling Installation
8. To complete your chimney installation, install the double wall
connector pipe from the fireplace’s flue collar to the chimney
support device.
9. If you are using a horizontal connector, the chimney connector
should be as high as possible while still maintaining the 6"
(152mm) minimum distance from the horizontal connector to
the ceiling.
10. NOTE: Residential Close Clearance and Alcove installations
require a listed double wall connector from the fireplace
collar to the ceiling level.
The diagrams below illustrate one way to install your unit into a
standard ceiling or with a horizontal connector. Check with your
dealer or installer for information on other options available to
you.
EN
15
installation