24
|
Regency Bellavista
®
B41XTCE -11 Gas Fireplace
installation
10.
From the inside of the firebox: place the exhaust assembly into position
as shown in Diagram27 and secure with 10 - 1/4" x 1/2" screws (Diagram
28). Ensure all screws are tight, but do not over tighten.
All 10 screws must be used.
12.
From the outside rear of the firebox: install the intake cover plate with
4 - 1/4" x 1/2" screws. Ensure all screws are tight, but do not over tighten.
All 4 screws must be used.
13. Set vent restrictor accordingly—see next page.
14.
From inside the firebox: re-install the baffle plate from step 2.
11.
From the outside top of the firebox: install the intake collar assembly.
Secure with 4 - 1/4" x 1/2" screws. Ensure all screws are tight, but do not
over tighten. All 4 screws must be used.
Intake Collar
Assembly
Exhaust
Assembly
8.
From the outside top of the firebox: completely remove the insulation
under the cover plate as shown and discard.
9.
From the outside back of the firebox: locate the insulation deflector
and bend completely upwards flat against the back of firebox.
IMPORTANT: If the insulation deflector is not bent flat against the back of
the firebox this will block air intake which will affect the unit's performance.
View Front of Firebox
Insulation Deflector
Diagram 27
Diagram 28
Diagram 29
Diagram 30
Diagram 31
Diagram 32
Summary of Contents for Bellavista B41XTCE
