41
1.Uncover and clean the motorcycle.
2.Check the accumulator voltage. When the voltage is 12.3V below, slowly charge the accum-
ulator as required Install the accumulator,
3.Drain any rust-inhibiting oil from the fuel tank. Fill the fuel tank with fresh Petrol.
4.Perform all pre-ride inspection checks. Test ride the motorcycle in a safe area from traffic.
Check that the motorcycle functions properly.
Clean the motorcycle off dust and mud with dry cloth regularly. Dry the motorcycle when it is wet.
Apply a little rust-inhibiting oil on zinc-coated and chrome-coated parts. Wax the painted parts to keep
them bright and elegant. Lubricate every moving Part.
In flate both front and each tyres properly. Measure the pressure with a gauge and make it in accordance
with the specified requirements.
Che ck for bolts, nuts and screws to prevent a safety hazard resulting from loosening or falling-off of parts.
Check for both front and rear brakes. Immediately adjust and replace if they are excessively worn or
don't function properly.
Perform the pre-ride inspection at each scheduled maintenance period. Symbols in the table stand for as
follows:
1.INSPECT, CLEAN, ADJUST, LUBRICATE OR REPLACE IF NECESSARY.
C:CLEAN R:REPLACE A: ADJUST L:LUBRICATE I:INSPECT
* Should be serviced by your authorized service dealer unless the owner has proper tools and parts or is
mechanically qualified.
** I n the interest of safe ty, we recommend these items be serviced only by your authorized service dealer.
REMOVAL FROM STORAGE
MAINTENANCE
MAINTENANCE SCHEDULE
