33
[Brake Disc]
The brake disc will be worn after being used for a period of time. In order to ensure that the
brake system can function properly and reliably, replace the disc when it is extremely worn.
The limit of motorcycle brake disc is 3.5mm, the same marked on the brake disc.
1.The fluid disc brake operates under high
pressure the fluid at the frequency interval no
longer than that has been established in the manual.
2.If it is necessary to maintain the brake
system or the disc, go to your authorized
service dealer for the sake of safety.
WARNING
[Brake System]
Pre-ride inspection must be performed
every day on the following item:
A.
Check the brake system for fluid
leakage;
B.
Check the fluid tube and the reserve
air for leaks or cracks;
C.
Check wear of the brake disc;
D.
Ensure the rear brake step pole unchanged
free play for the front brake lever at any time.
Don not ride your motorcycle after you have
just replaced the disc with a new one. Grasp and
release the front brake lever several times until
the brake disc fits the brake calipers well, thus
returning the front brake lever to normal free play.
WARNING
wear mark brake disc brake calipers
